APL / 09
↗
↗Wood finishing
Double Station Roller Coater
Two coating stations for surface finishing workflows.
StationsTwo
Discover the machine →GLASS FINISHING
APL COLLECTIONGlass Roller Coater
46 / 58
01 / Machine view
BUILT AROUND YOUR APPLICATION
Roller coating for a glass-finishing workflow.
The Roller Coating Machine is listed in APL’s glass-machinery range for applying a surface coating through a roller-based process. The RC 30 and RC 40 reference models list working widths of 750 and 1,000 mm.
APL also describes paper and other substrate applications, so the roller arrangement and coating chemistry must be selected specifically for the glass job. An air-knife arrangement is described as an option. Discuss coating deposit, glass thickness, handling and the required downstream cure with APL.
A CLOSER LOOK / Detail viewENGINEERING IN THE DETAILSPurpose in
Purpose in
every detail.
01Two reference widths+
RC 30 and RC 40 provide published coating widths of 750 and 1,000 mm.
02Roller application+
Transfer the coating through the machine’s roller arrangement.
03Optional air knife+
Discuss the source-listed air-knife arrangement for the intended application.
04Glass-specific selection+
Match coating chemistry, roller setup and handling to the glass rather than assuming one configuration suits every material.
THE TECHNICAL PICTUREExplore.
Explore.
Understand.
Specify.
Published reference information for your technical conversation.
| Model | Size | Power | Air compressor |
|---|---|---|---|
| RC 30 | 750MM | 1 HP | 5 HP |
| RC 40 | 1000 MM | 2 HP | 10 HP |
APL reference reviewed 2026-09-09. Specifications and options require current confirmation.
TAKE A CLOSER LOOKFrom the page.
From the page.
Into the picture.
Explore the available film and original product literature, then speak with APL about your application.
MAKE THE NEXT CONVERSATION COUNTBring the application.
Bring the application.
We’ll explore
the possibilities.
What to share with APL
- Glass dimensions, thickness and sheet handling
- Ink or coating system and intended end use
- Printing sequence, drying requirements and line layout
GOOD QUESTIONS. BETTER DECISIONS.Before your
Before your
next move.
Which applications is this machine designed for?+
The Roller Coating Machine is listed in APL’s glass-machinery range for applying a surface coating through a roller-based process. The RC 30 and RC 40 reference models list working widths of 750 and 1,000 mm.
What should I share for a quotation?+
Please send glass dimensions, thickness and sheet handling; ink or coating system and intended end use; printing sequence, drying requirements and line layout. Include a sample or representative artwork when available.
Can APL help with installation and training?+
APL offers installation, operator training and after-sales assistance. Discuss the support scope, location, schedule and any retrofit requirements with the team when finalising your machine configuration.
KEEP EXPLORINGPart of a
View this technology